Little Elm Concrete Lifting logoLittle Elm Concrete LiftingLittle Elm, TX
Foam Concrete Lifting photo

Little Elm Concrete Lifting

Foam Concrete Lifting in Little Elm, TX

Foam concrete lifting raises sunken slabs fast with lightweight polyurethane injection, ideal for Little Elm clay soil. Free estimates.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Little Elm and nearby communities.

Foam concrete lifting uses two-part polyurethane foam instead of a cement slurry to raise a sunken slab. The foam expands within seconds of injection and adds far less weight to the soil underneath than mudjacking does.

That matters on Little Elm's clay-heavy lots. Added slurry weight can compress soft, still-settling soil right back down. Little Elm Concrete Lifting reaches for foam when the slab is thinner, access is tight, or the soil calls for a lighter touch.

What's included

What's included with Foam Concrete Lifting

Typically included: Optional: Customer prep:

  • Assessment to confirm foam is the right method for the slab
  • Small drill holes, roughly dime-sized
  • Metered foam injection with real-time lift monitoring
  • Quick patch and seal of the access holes
  • Soil stabilization resin injected alongside the foam for repeat-sinking areas
  • Crack sealant on adjacent joints
  • Clear the immediate area around the sunken slab
  • Note if the slab is near a pool, patio furniture, or landscaping edges

How it works

How our Foam Concrete Lifting process works

  1. Drilling photo
    Step 1

    Drilling

    Dime-sized holes placed at calculated injection points.

  2. Injection photo
    Step 2

    Injection

    Two-part foam pumped in and begins expanding immediately.

  3. Expansion monitoring photo
    Step 3

    Expansion monitoring

    Crew tracks lift with a level as the foam grows.

  4. Pressure adjustment photo
    Step 4

    Pressure adjustment

    Injection rate controlled to avoid overlifting one spot.

  5. Follow-up check photo
    Step 5

    Hole patching

    Access points sealed with matching concrete compound.

  6. Final check photo
    Step 6

    Final check

    Slope and level confirmed before the crew leaves.

When to call

When to call for Foam Concrete Lifting

Call Little Elm Concrete Lifting at +1 (361) 420-8163 if any of that sounds like your slab.

  • Your slab is thin, like a sidewalk or pool deck, where extra slurry weight isn't ideal
  • Access is tight and a bulky mudjacking rig can't easily reach the area
  • Your lot sits on soil with heavier moisture swings, common near Little Elm's lake-adjacent streets
  • You need a fast turnaround since foam cures within an hour

Before & after

Before and after Foam Concrete Lifting results

  • Foam Concrete Lifting photo
    Before
  • Foam Concrete Lifting photo
    After

FAQs

Foam Concrete Lifting FAQs

Is mudjacking or foam injection better for a lakeside home?

Foam tends to be the better fit near the lake, since it adds less weight to soil that already sees more moisture movement. Mudjacking still works well on thicker slabs that can handle the extra load.

Will foam lifting work if my house is on expansive clay soil?

Foam is often the preferred choice specifically because it's lighter. Heavier slurry can compress soft clay soil right back down after the lift.

Is DIY polyurethane foam lifting kits worth trying first?

DIY kits can lift a small, isolated dip, but they lack the metered pressure control pro equipment uses. Uneven expansion under a kit can crack the slab further or lift one section higher than the rest.

How fast does foam cure compared to mudjacking?

Foam is typically drivable within about an hour. Mudjacking slurry needs 24 to 48 hours before it can handle full vehicle weight.

Does foam cost more than mudjacking?

Per pound, yes. But foam often takes less material volume to achieve the same lift, so total job cost can land close to mudjacking depending on the slab.

Next step

Get a Foam Concrete Lifting estimate in Little Elm

Ask about Foam Concrete Lifting

Tell us about the project and how to reach you.

Call (361) 420-8163